100TP-SD

CWP 150 Two Piece Body Bolted
All the sealing is accomplished by the elastomeric sleeves in the valve housing
Bi-directional Natural Rubber Sleeved Valve

Model # 100TP-SD
Flow Direction Bi-directional
Valve Size 2” – 24” (50 mm – 600 mm)
Design Raised face body tapped flange in accordance with ANSI150,JIS10K, DIN PN10 and AS 2129 Table D & E
Pressure Rating  & Operating Temperature 3” – 16”  (DN 80-400) operate at 150 psi (10.3 bar) / Up to 180 °F (82 °C). 
18” -  24” (DN 450-600) operate at 90 psi (6.2 bar) / Up to 180 °F (82 °C). 
Shutoff 100% isolation, bubble tight in zero downstream leakage 
Body CF8, CF8M, CG3M, Duplex Stainless Steel, Special Alloy, NI-RESIST  ASTM A439 TYPE-2, CS, WCB
Gate  304,316 and Nickel based Non-Stick Overlay 
Seat Long lasting Natural Rubber Sleeves Seated
Packing  * Packingless
Actuator Options Hand Wheel, Bevel Gear, Pneumatic Cylinder, Electric Motor Lever, Ratchet and Chain Wheel.
Advantage -. Easy maintenance & Replaceable Seat and Sleeves.
-. No seat cavity where solids can collect and prevent full gate closure 
-. The elastomeric seats have been engineered to provide a high degree of abrasion resistance and chemical compatibility.
-. UHMW gate support liner, which can help provide smooth gate operation and alignment while eliminating body wear
Application copper, gold, silver or phosphate.

Design Features

No. PARTS MATERIALS
1 Body Spacer ASTM A240 SS316/ SS304
Carbon Steel Coated 
2 Liner  UHMW
3 Body ASTM A276 SS304 /316
Carbon Steel Coated 
4 Seat Ring Natural Rubber 
5 Gate ASTM A240 SS316/ SS304
6 Secondary Seal  Silicone
7 Packing Gland Fasteners ASTM A240 SS316/ SS304
9 Drain Plate ASTM A276 SS304
10 Secondary Seal  Silicone
11 Clevis  ASTM A276 SS304
Carbon Steel Coated 
12 Yoke   ASTM A240 SS316/ SS304
Carbon Steel Coated 
13 Cylinder  ASTM A276 SS304
  Bolt ASTM A240 SS304
  Nut ASTM A240 SS304
  Washer ASTM A240 SS304